Indicador de Carátula Digital Micron

.manual/auto power off
2.preplace started position value,without reset before change the battery
3.counting converse
4.mm/in conversion
5.absolute and relative measurement
6.set zero at any position
7.TOL value setting
8.auto distinguish windage state
9.high-speed tracking maximum/minimum/extremum
10.run-out detector
11.number and finger simulate display
12.high capacity 3V Li battery

13.Maximum and minimum reading tracking

14. Stem diameter 8mm (3/8" is optional)

15. separated sensor and display

Tech Parameter：

display:broad screen dispay
maximum reaction speed:1.5m/s
axis diameter:8mm(ISO/GB ) or 3/8〞(ANSI )
point gauge:with M2.5X0.45 screw thread horniness metal ball
         or with#4-48UNF screw thread horniness metal ball
battery life:2,000 hours 

No. de Artículo	Intervalo(mm)	Resolución(mm)	Preción(um)	Medición de Fuerza
MDI-101	0-12.7	0.001	4	less than 1N
MDI-102	0-25.4	0.001	5	less than 1N
MDI-103	0-50.8	0.001	6	less than 1N