1.manual/auto power off
2.preplace started position value,without reset before change the battery
3.counting converse
4.mm/in conversion
5.absolute and relative measurement
6.set zero at any position
7.TOL value setting
8.auto distinguish windage state
9.high-speed tracking maximum/minimum/extremum
10.run-out detector
11.number and finger simulate display
12. with data output

13. separated sensor and display

No. de Artículo	Intervalo(mm)	Resolución(mm)	Preción(um)	Medición de Fuerza
MDI-301	0-12.7	0.001	4	less than 1N
MDI-302	0-25.4	0.001	5	less than 1N
MDI-303	0-50.8	0.001	6	less than 1N