The Intelligent Power sockets are different from the traditional one, as it is much Intelligent.
Simply put, It can detect the people in the room by micro wave and manage the power and save energy and money for you.
It can be used
Hotel,
Office,
Hosehold
Intelligent Power sockets Features:
1. Newly design and You cannot find it on the website. It is a chance for you.
2. You can get allowance from your government.
3. Delay time (on or off) and scanner area can be selectable
Introduction:
a) Designed based on Doppler radar principle, operated at 5.8GHz. A DC power supply from 7 to 20 volts can make it work immediately.
b) High reliability by using microcomputer program analysis. The sensing distance is from 0.3 to 15 meters corresponding with 16 stages sensitivity adjustment. Four kinds of trigger mode can be obtained to select the time interval of alarm signal among 2 seconds, 60 seconds, 300 seconds and 600 seconds. A day time triggering may be avoided by adding a photosensitive resistor.
c)Non-touch sensor, with strong ability against RF interference. It will not be influenced by temperature, humidity, sunshine, air flow and dust. Also it can be installed inside nonmetal crust, such as plastic, glass and wood, so that it may be used in many kinds of products or device control conveniently.
Microwave Sensor Specification:
•Center frequency ------ 5.8GHz
•Operating voltage ------ DC 7V ~ 20V
•Operating current ------ 6mA max.
•High / low output level ------ 5V / 0V
•3dB antenna pattern ------ 180 deg. Nom. E-plane
•------ 180 deg. Nom. H-plane
•Sensing distance ------ 0.3 ~ 15 meters with 16 stages adjustment
•Triggering mode ------ 4 options
•Pulse width ------ 20μs with 1ms duty cycle
•Operating temperature range ------ -30 ~ +55℃
•Dimensions ------ 40.8mm * 36.3mm * 15mm (not include antenna)
Are Loading Data, Please wait while loading...
cn
en
es
pt
Product Search
Product Columns
Product Details